Written by Adam Taylor [Response to attempted debunking of this article] ae911truth.org | ||||
Thursday, 12 January 2012 16:21 | ||||
We first frame the issue by noting that the answer to this question does not negate the evidence that the Towers were destroyed through controlled demolition. The massive amount of evidence gathered by AE911Truth and countless others demonstrates that the combined effects of the impacts and the ensuing fires do not account for the complete and explosive destruction of the WTC skyscrapers. The explosive destruction of the Twin Towers actually began at floors with minimal damage from the planes. In the North Tower, the collapse began at the 98th floor, which in fact had minimal structural damage. Only the tip of the right wing cut through that floor.
According to the NIST report (NCSTAR 1, pg. 87), the collapse of the North Tower began at this floor. Though the NIST report never specifically states that the 98th floor was the least damaged, the information provided in their report clearly demonstrates this as the case. The 98th floor had only five perimeter columns severed, and the table provided in NCSTAR 1-2, pg. 205 indicates that NIST does not list floor 98 as having any of its core columns severed.
If the demolition was started at the 98th floor, where there was the least amount of damage from the plane, then the plane's impact would not have had any serious effect on well-designed devices placed on this floor. Second, a demolition using advanced nanothermite material (which has been identified in the WTC dust) may help to explain why the fires started by the planes did not set off explosive devices. As noted by Dr. Steven Jones: It is important to note that initiating the thermite reaction requires temperatures well above those achieved by burning jet fuel or office materials -- which is an advantage of using thermite charges over conventional monomolecular explosives such as TNT, RDX and PETN. Below is a photograph of an experiment performed by the author and colleagues at BYU in which a sample of thermite was heated to orange-hot temperature (about 1700 ºF). We demonstrated that the thermite reaction would not ignite at this high temperature. Later, the thermite reaction was triggered by burning a magnesium strip in contact with the thermite. An electrical superthermite "match" could have been used and remotely triggered via radio signal.
Dr. Jones’ point about triggering the thermite with electrical superthermite matches is noteworthy because, as pointed out by Los Alamos National Laboratory, these types of matches can be made to “resist friction, impact, heat, and static discharge through the composition, thereby minimizing accidental ignition.” The same article notes that one application of these matches can be to trigger explosives for demolition. Partly because thermate produces bright orange light while burning, Stage 1 is allowed time to run to completion before Stage 2 commences. In the South Tower, some thermate pushed by the plane crash from the building's core to its corner generates an orange spout lasting from about T-7 to T-2 minutes.
Critics contend this material is molten aluminum from Flight 175. However, these claims have been shown to be false. Even if the devices were affected in some way by the planes, this does not automatically mean that the overall demolition of the Towers was affected. If anything, the molten metal flowing from the South Tower is very likely evidence of thermitic-based devices placed in the building which may have been disturbed and ignited by the plane impact itself.
Further exploration of this topic can be found at 911Research.com. |